Is my drinking water safe? Yes, our water meets all of EPA’s health standards. We have conducted numerous tests for over 80 contami- nants that may be in drinking water. As you’ll see in the chart, we only detected nine of these contaminants. We found all of these contaminants at safe levels. What is the source of my water? Your water, which is ground water, comes from a tertiary sand aquifer. Our goal is to protect our water from contaminants and we are working with the State to determine the vulnerability of our water source to potential contamination. The Tennessee Department of Environment and Conservation (TDEC) has prepared a Source Water Assessment Program (SWAP) Report for the untreated water sources serving water to this water system. The SWAP Report assesses the susceptibility of untreated water sources to potential contamination. To ensure safe drinking water, all public water systems treat and routinely test their water. Wa- ter sources have been rated as reasonably susceptible, moderately susceptible or slightly susceptible based on geologic factors and human activities in the vicin- ity of the water source. The Trezevant Water System sources rated as reasonably susceptible to potential contamination. An explanation of Tennessee’s Source Water As- sessment Program, the Source Water Assessment summaries, susceptibility scorings and the overall TDEC report to EPA can be viewed online at https:// www.tn.gov/environment/program-areas/wr-water- resources/water-quality/source-water-assessment. html or you may contact the Water System to obtain copies of specific assessments. A wellhead protection plan is available for your review by contacting Joe Waldrup at the Trezevant Water System between 7 a.m. to 3:30 p.m. weekdays. Why are there contaminants in my water? Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environ- mental Protection Agency’s Safe Drinking Water Hotline (800-426-4791). Este informe contiene información muy importante. Tradúscalo o hable con alguien que lo entienda bien. For more information about your drinking water, please call Joe Waldrup at 731-669-4831. How can I get involved? Our Water Board meets on the second Tuesday of every month at 6:30 p.m. at City Hall. Please feel free to participate in these meetings. Is our water system meeting other rules that govern our operations? The State and EPA require us to test and report on our water on a regular basis to ensure its safety. We have met all of these requirements. Results of unregulated contaminant analysis are available upon request. We want you to know that we pay attention to all the rules. Other information The sources of drinking water (both tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally-occurring minerals and, in some cases, radio- active material, and can pick up substances resulting from the presence of animals or from human activity. Contaminants that may be present in source water: • Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock opera- tions, and wildlife. • Inorganic contaminants, such as salts and metals, which can be naturally-occurring or result from urban storm water runoff, industrial, or domestic wastewater discharges, oil and gas production, mining, or farming. • Pesticides and herbicides, which may come from a variety of sources such as agriculture, urban storm water runoff, and residential uses. • Organic chemical contaminants, including synthetic and volatile organic chemicals, which are by-products of industrial processes and petroleum production, and can also come from gas stations, urban storm water runoff, and septic systems. • Radioactive contaminants, which can be naturally- occuring or be the result of oil and gas production and mining activities. In order to ensure that tap water is safe to drink, EPA and the Tennessee Department of Environment and Conservation prescribe regulations which limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water which must provide the same protection for public health. Do I Need To Take Special Precautions? Some people may be more vulnerable to contami- nants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/ AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about not only their drinking water, but food preparation, personal hygiene, and precautions in handling infants and pets from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbiological con- taminants are available from the Safe Drinking Water Hotline (800-426-4791). Lead in Drinking Water If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primar- ily from materials and components associated with service lines and home plumbing. Trezevant Water System is responsible for providing high quality drink- ing water, but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Infor- mation on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline 800-426-4791 or at http://www.epa.gov/safewater/lead. Water System Security Following the events of September 2001, we realize that our customers are concerned about the security of their drinking water. We urge the public to report any suspicious activities at any utility facilities, in- cluding treatment plants, tanks, fire hydrants, etc. to 731-669-4831. Think before you flush! Flushing unused or expired medicines can be harmful to your drinking water. Properly disposing of unused or expired medication helps protect you and the environ- ment. Keep medications out of Tennessee’s waterways by disposing in one of our permanent pharmaceutical take back bins. There are nearly 100 take back bins located across the state, to find a convenient location please visit: http://tdeconline.tn.gov/rxtakeback/. Trezevant Water System Water Quality Report for 2024 Wa t e r Q u a l i t y D a t a What does this chart mean? • MCLG - Maximum Contaminant Level Goal, or the level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety. • MCL - Maximum Contaminant Level, or the highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology. To understand the possible health effects described for many regulated constituents, a person would have to drink 2 liters of water every day at the MCL level for a lifetime to have a one-in-a-million chance of having the described health effect. • MRDL - Maximum Residual Disinfectant Level or MRDL: The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for the control of microbial contaminants. • MRDLG - Maximum residual disinfectant level goal. The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants. • AL - Action Level, or the concentration of a contaminant which, when exceeded, triggers treatment or other requirements which a water system must follow. • Below Detection Level (BDL) - Laboratory analysis indicates that the contaminant is not present at a level that can be detected. • Non-Defects (ND) - Laboratory analysis indicates that the contaminant is not present. • Parts per million (ppm) or Milligrams per liter (mg/l) - Explained as a relation to time and money as one part per million corresponds to one minute in two years or a single penny in $10,000. • Parts per billion (ppb) or Micrograms per liter - Explained as a relation to time and money as one part per billion corresponds to one minute in 2,000 years, or a single penny in $10,000,000. • Picocuries per liter (pCi/L) - piocuries per liter is a measure of the radioactivity in water. • RTCR - Revised Total Coliform Rule. This rule went into effect on April 1, 2016 and replaces the MCL for total coliform with a Treatment Technique Trigger for a system assessment. • TT - Treatment Technique, or a required process intended to reduce the level of a contaminant in drinking water. A394/19-1 Contaminant Violation Yes/No Level Found Range of Detections Date of Sample Unit Measurement MCLG MCL Likely Source of Contamination Total Coliform Bacteria (RTCR) No 0 2024 0 TT Trigger Naturally present in the environment Copper 1 No 90th% = 0.217 0.0109- 0.239 2024 ppm 1.3 AL=1.3 Corrosion of household plumbing systems; erosion of natural deposits; leaching from wood preservatives Lead 1 No 90th% = 1.3 0.09-1.8 2024 ppb 0 AL=15 Corrosion of household plumbing systems, erosion of natural deposits Nitrate (as Nitrogen) No 1.99 1.99* 2024 ppm 10 10 Runoff from fertilizer use; leaching from septic tanks, sewage; erosion of natural deposits Combined radium No 5.29 5.29* 2021 PCi/1 0 5 Erosion of natural deposits Mercury (inorganic) No 0.22 0.22* 2020 ppb 2 2 Erosion of natural deposits; discharge from refineries and factories; runoff from landfills; runoff from cropland Sodium No 14.5 14.5* 2023 ppm N/A N/A Erosion of natural deposits; used in water treatment Sulfate No 4.33 4.33* 2020 ppm N/A N/A TTHM [Total trihalomethanes] No 6.0 6.0* 2024 ppb N/A 80 By-product of drinking water chlorination Haloacetic Acids (HAA5) No <1.0 <1.0* 2024 ppb N/A 60 By-product of drinking water disinfection Chlroine No Avg. 1.45 0.87-1.95 2024 ppm 4 4 Water additive used to control microbes Iron: Iron occurs naturally in our raw water and occasionally accumulates in the distribution system. Iron shows up as “red” or “rusty” water at your tap. Although you do not want to drink water that is not clear, iron is not considered to be a hazard to your health. The aesthetic limit for iron is 0.3 ppm. 1 During the most recent round of Lead and Copper testing, only 0 out of 10 households sampled contained concentra- tions exceeding the action level. *We are only required to collect one sample from a single location.
